TI CD74HCT423M96

Моностабильный25 нс4,5 В ~ 5,5 В

Overview

The ’HC123, ’HCT123, CD74HC423 and CD74HCT423M96 are dual monostable multivibrators with resets. They are all retriggerable and differ only in that the 123 types can be triggered by a negative to positive reset pulse; whereas the 423 types do not have this feature. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adjustment of Rx and CX provides a wide range of output pulse widths from the Q and Q\ terminals. Pulse triggering on the A\ and B inputs occur at a particular voltage level and is not related to the rise and fall times of the trigger pulses.

The minimum value of external resistance, Rx is typically 5k. The minimum value external capacitance, CX, is 0pF. The calculation for the pulse width is tW = 0.45 RXCX at VCC = 5V.

Features

74HCT Series
in 16-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74HCT
based on 74HCT423
Supply Voltage: 5V
Quiescent Current at 8μA
output current at 4mA
2 bits

4.5 V ~ 5.5 V Voltage - Supply

Applications

There are a lot of Texas Instruments
CD74HCT423M96 applications of multivibrators.

• Pulse shaping
• Astable multivibrator
• Envelope detection
• Frequency multiplication
• Frequency division
• Frequency discriminators
• Timing clrcults
• Time-delay applications
• AV Receivers
• Blu-ray Players and Home Theaters