TI CD74HCT4538E

Моностабильный23 нс4,5 В ~ 5,5 В

Overview

The ’HC4538 and ’HCT4538 are dual retriggerable/resettable monostable precision multivibrators for fixed voltage timing applications. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adjustment of RX and CX provides a wide range of output pulse widths from the Q and Q\ terminals. The propagation delay from trigger input-to-output transition and the propagation delay from reset input-to-output transition are independent of RX and CX.

Leading-edge triggering (A) and trailing edge triggering (B)\ inputs are provided for triggering from either edge of the input pulse. An unused "A" input should be tied to GND and an unused B\ should be tied to VCC. On power up the IC is reset. Unused resets and sections must be terminated. In normal operation the circuit retriggers on the application of each new trigger pulse. To operate in the non-triggerable mode Q\ is connected to B\ when leading edge triggering (A) is used or Q is connected to A when trailing edge triggering (B)\ is used. The period (. CMIN is 0pF.

Features

74HCT Series
in 16-DIP (0.300, 7.62mm) package
Mounting Type: Through Hole
Logic Type: Monostable
Operating Temperature: 74HCT
based on 74HCT4538
Supply Voltage: 5V
Quiescent Current at 8μA
output current at 4mA
2 bits

4.5 V ~ 5.5 V Voltage - Supply

Applications

There are a lot of Texas Instruments
CD74HCT4538E applications of multivibrators.

• Pulse shaping
• Astable multivibrator
• Envelope detection
• Frequency multiplication
• Frequency division
• Frequency discriminators
• Timing clrcults
• Time-delay applications
• AV Receivers
• Blu-ray Players and Home Theaters