TI TPS25910RSAR

Контроллер горячей замены1Тепловой предел, UVLO

Overview

The TPS25910RSAR device provides highly integrated hot- swap power management and superior protection in applications up to 20 V. The maximum UV turn-on threshold of 2.9 V makes the TPS25910RSAR device well suited to standard bus voltages as low as 3.3 V. This device is intended for systems where a voltage bus must be protected from undesired permanent and transient overload. At start-up or when hot plugging into the system bus, the TPS25910RSAR device limits the inrush current by controlling the ramp rate of the output voltage, Vour.The slew rate of Vour can be adjusted with a capacitor between the GATE pin and the GND pin. Built in SOA protection ensures that the internal MOSFET operates inside a safe operating area (SOA) under the harshest operating conditions. In addition, the current-limit threshold, which is independent of the power limit, can be adjusted with a resistor between the ILIM pin and the GND pin. The TPS25910RSAR device provides a fault indicator output when in thermal fault. The TPS25910RSAR device is available in a 16-pin QFN package.

The TPS25910 device is available in a 16-pin QFN package.

Features

Applications

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems