TI VFC320CP

Вольт к частоте и частота к вольтам1 МГц±20ppm/°C

Overview

The VFC320CP monolithic voltage-to-frequency and frequency-to-voltage converter provides a simple low cost method of converting analog signals into digital pulses. The digital output is an open collector and the digital pulse train repetition rate is proportional to the amplitude of the analog input voltage. Output pulses are compatible with TTL, and CMOS logic families.

High linearity (0.005%, max at 10kHz FS) is achieved with relatively few external components. Two external resistors and two external capacitors are required to operate. Full scale frequency and input voltage are determined by a resistor in series with—In and two capacitors (one-shot timing and input amplifier integration). The other resistor is a non-critical open collector pull-up (fOUT to +VCC). The VFC320CP is available in two performance grades. The VFC320CP is specified for the –25°C to +85°C, range.

Features

Applications

• Hand-Held Tachometers
• Speed Governors
• Cruise Control
• Automotive Door L ock Control
• Clutch Control
• Horn Control
• Touch or Sound Switches
• lsolation of High Common-Mode Voltages
• Low-Cost Analog-to-Digital Conversion
• Battery Monitoring