TI TPS2553DBVR

Общее назначение1Не требуется1.5A

Overview

The TPS2553DBVR is an Adjustable Active High Current-limited Power Distribution Switch intended for applications where precision current limiting is required or heavy capacitive loads and short-circuits are encountered and provide up to 1.5A of continuous load current. This constant current device offers a programmable current-limit threshold between 75mA and 1.7A (typical) via an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turn on/off. TPS2553DBVR device limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during over-current and reverse-voltage conditions.

Features

?MOSFET with a high-side capacitance of 85 mQ (DBV Package)

?Protection against reverse input-output voltage

?Operating Voltage: 2.5 to 6.5 Volts

?Soft-Start feature built-in

?IEC61000-4-2IEC61000-4-2IEC61000-4-2IEC61000-4-2IEC61000-4-2IEC61000-4-2 (with External Capacitance)

Applications

? USB Hubs/Ports

? Digital television

? Television Set-Top Boxes

? VOIP (Voice over Internet Protocol) Phones